CW-Double Cone Mixer
This product is used for mixing powder and fine particles in pharmaceutical, chemical, food, agricultural and other industries.
Double Cone Mixer CW200/300/500/1000/1500/2000/5000
The CW-Double cone mixer is a kind of equipment for mixing dry powder or dry small granular materials, suitable for pharmaceutical, chemical, food, agricultural and other industries.
The double-cone mixer has a unique structural design, the mixing container rotates, and the materials in the container move in multiple directions during the rotation process, so that the materials in the container have more mixing points, the effect is good, the mixing uniformity is high, and the maximum loading coefficient is 0.7 .
When the double-cone mixer is mixing, the rotation axis deviates from the center of the mixing container at an angle. When the container rotates, the material diffuses, flows and tangentially moves, so that the mixed material is carried out between materials under the action of frequent and rapid rotation and turning. The diffusion, shrinkage, flow and tangential movement of the material make the materials mix with each other from their respective states, ensuring that the materials meet the ideal mixing requirements in a short time.
Structure:
1. Machine base: It is composed of structural parts and stainless steel panels, and is equipped with transmission system and electrical appliances.
2. Transmission system: It is composed of belt, reducer, sprocket and other transmission mechanisms.
3. Mixing container: The double-cone special structure is made of high-quality stainless steel, the inner and outer surfaces are polished, no dead angle, easy to clean, in line with GMP requirements, and the discharge is controlled by a butterfly valve. The material is discharged smoothly under the action of its own weight. No accumulated material, no cross-contamination and other advantages.
Remarks
- Before the initial installation and test run, it needs to run empty for 10-30 minutes to ensure that the mixer is not damaged during the installation process and that there is no friction in the transmission parts.
- It is strictly forbidden to put long fibers or hard materials into this equipment.
- When the initial installation is completed, lubricating oil of the corresponding label must be injected into the reducer, and the lubricating oil will be replaced every 3 months thereafter.
- The wearing parts of the mixer should be replaced regularly according to the actual situation.
| model | W-200 | W-300 | W-500 | W-1000 | W-1500 | W-2000 | W-5000 |
| Full volume (L) | 200 | 300 | 500 | 1000 | 1500 | 2000 | 5000 |
| Maximum charging volume (L) |
100 |
150 |
350 |
700 |
1050 |
1000 |
2500 |
| Maximum charge weight (kg) |
100 |
150 |
210 |
420 |
630 |
1000 |
2500 |
| Motor power (KW) | 1.1 | 1.5 | 2.2 | 4 | 5.5 | 7.5 | 18.5 |
CapsulCN DZ Offers
Backed by our 25 years of experience in pharmaceutical engineering solutions, we design, manufacture and supply high quality pharmaceutical process and packaging equipment to the industry worldwide.
Contact CapsulCN DZ
Get in touch with us today to discuss your project and how we can help you fully realize its potential.
Constantine, 25000, ALGERIA
+213-555-27-33-05
dz@capsulcn.com